:	May 13, 2004

.

Fully extend the steering column for access.

.

Remove the steering column upper shroud.   Release the 4 clips.

.

Remove the steering column lower shroud.   Remove the 3 Torx screws.   Release the steering column adjustment lever.

.

: The ignition key must be removed prior to the removal of the ignition switch. Remove the ignition switch.   Disconnect the electrical connector.   Depress the 2 clips.

.

Install the ignition switch.   Secure with the clips.   Connect the electrical connector.

.

Install the steering column shrouds.   Tighten the Torx screws.   Secure the clips.   Secure the adjustment lever.